ATQR series submersible pump for high temperature pool water
Application:
ATQR series submersible pump for high temperature pool water is suitable for enterprises and public institutions hot water circulating, steel cooling water heat dissipation, the discharge, disposal and using of industry hot waste water, bath center, district heat supply, This pump is low noise, high efficiency and energy saving.
Medium range:
1. Water temperature range: +5--+105
2. Allowable diameter of Solid in hot water: ≤1mm
3. Solid content (mass ratio): ≤0.01%
4. PH: 6.5-8.5
5. H2S content: ≤1.5mg/L
6. Cl- content: ≤400mg/L
7. The full set must be completely submerged into water in vertical position. While it will be inferior to the vertical form incling 45, horizontal use will lessen half of its service life.
Motor Parameter:
The length of extended cable: 2.5m. If you want to lengthen the extended cable, please inform us in advance. The submersible motor is lubricated by clean water. It must be filled with clean water, or its service life will be lessen. If you forget filling, the motor will be broken.
Motor protection level: IPx8
Electromagnetic wire material: high temperature resistant and water proof.
Power Source:
Rated voltage: 380v (±5) Frequency: 50Hz(±1).
If you need special voltage or frequency, please inform us in advance.
Materials:
Impeller: Cast iron HT200, or tin bronze, such as ZCuSn3Zn8Pb6Ni1
Pump bowl: Cast iron HT200, or stainless steel, such as 2Cr13.304
Pump shaft: Cold-drawn steel with chrome plating, or stainless steel 2Cr13(1050thermal refining, enhancen torsional moment.
Motor Seal: Rubber O-ring seal, mechanical seal
Motor regulating sleeve: rubber
Advantages:
1. Easy installation
2. Low noise, high temperature resistance, long service life.
3. Fully operating in water avoiding entering air.
4. Replacing the emergency pump quickly when the pump breaks down in harsh environment such as high temperature water tank or pool, or somewhere that are inconvenient for man to maintain.
5. Portable design with its small size and light weight. so you needn’t install bay bolt.
|