ATQH series submersible pump
Application:
It is suitable for offshore platform fire-fighting, thermal dissipation, seawater desalinization, seawater lifting, coastal square fountain, mariculture and attemperation as ground source heat pump in coastal area. It also can lift underground drinking water and mineral water,etc.
Material:
QH series stainless steel submersible pump has several kinds of material.
Seawater and strongly corrosive medium: austenitic stainless steel 316, 316L, tin bronze,etc.
Moderately corrosive medium: austenitic stainless steel 304,etc.
Advantages:
CNC lathe precision machining ensures parallelism and perpendicularity of all the castings.
With rigorous testing, well installation and full load performance test, you can feel easy to use it.
Some of our products manufactured by introducing the Germany Ritz technology, improving the pump’s efficiency and making it more energy-saving & environment-friendly.
Motor parameter:
The motor is accord with GB/T2818-2002 pump industry standard, and it is lubricated by water. The motor must be filled with water. The standard length of the extended cable is 3m.
If you need special requirement, we can extend its length. The working temperature should be a little higher than that of common motor because of its poor magnetic conductivity.
Power:
The general power specification we supply you:380v/50Hz±5. We also can provide customised specifications at your requirements. The variation of voltage and frequency ratings and its influence on motor performance and temperature should meet the requirements of GB755(National Standard)
Notes:
We can provide you the suitable products if the actual working condition, the voltage or the frequency are not consistent with above specifications.
Working condition:
The motor should be submerged into water with the depth no more than 70m;
Water temperature: ≤20℃
Solid content (mass ratio): ≤0.01%
Refer to the technical agreement to learn more parameters.
|
