ATQJR series submersible pump
Application
1. Collecting and reusing boiler hot water.
2. Collecting and reusing the leaking water of heating pipelines in winter.
3. Factory hot water heat dissipation and reuse (the pump should be submerged into water when working).
4. Pumping high temperature water in the heat-supply network groove
5. Suitable for heat-supply equipment maintenance.
6. Suitable for bath center hot water supply.
7. Lifting underground hot spring water, etc.
Advantage
1. It can pump hot water within 125℃.
2. It can be horizontally used(while the service life will lessen 40% than that of vertical use).
3. Easy installation
4. Air-free design, avoiding the trouble of pump priming.
5. The motor is water lubricated by water. With its hydrocooling property and high-temperature water-proof wire, it is pollution-free to the environment.
6. No need to build pump room
7. Stable operation and low noise.
Motor parameter
1. The submersible motor is lubricated by clean water. It must be filled with clean water, or its service life will be lessen.
2. If you forget filling, the motor will be broken.
3. Motor protection level: IPx8
4. Magnet wire is high-temperature water-proof.
5. The motor should be submerged into water and be operated in vertical form with a depth no more than 70m and the lower distance to the bottom of the pool is less than 0.3m.
6. The motor will operate continuously. If it is used in pool, the fair water is needed to cool the motor.
7. The motor must be filled with clean water.
Power
Voltage: 380v/660v±5 frequency: 50Hz/60Hz±1.
If you have some special requirements, please indicate in the technology agreement.
|
